Toyota Tundra Parts & Wheel Fitment
2022 Toyota Tundra Wheel Fitment. Stored configurations: 9. Wheel diameter: 18–20 in. Wheel offset: 60 mm. Bolt patterns: 5×150, 6×139.7. Vehicle hub bore: not established for this selection. Select a stored configuration, then enter a proposed wheel. The catalog does not prove OEM approval for every row.
Stored wheel configurations are catalog reference rows. They are not labeled factory OEM unless a source row independently says so.
Stored reference coverage
Values that vary are shown as a range. Select a stored configuration before treating one row as the comparison baseline.
- Rim diameter
- 18–20 in
- Rim width
- 8 in
- Offset
- 60 mm
- Backspacing
- 6.4 in Derived from width and offset. Not a stored catalog field.
- Bolt pattern
- 5×150, 6×139.7
- Trim center bore
- 95 mm, 110.1 mm Trim records differ. Select a configuration for one value.
- Thread
- M14 x 1.5
- Fastener
- Lug nuts
- Tire sizes
- 6 stored sizes
Proposed wheel
Prefill copies the selected catalog row as a starting point. Edit every field for the aftermarket wheel you want to check.
Fitment comparison
- Bolt pattern: Unknown
Select a stored configuration before treating bolt pattern as known.
- Center bore: Unknown
Hub sources disagree (95 mm trim bore; 110.1 mm trim bore). Verify the hub on the vehicle before an exact ring recommendation.
- Wheel position: Unknown
Enter proposed width and offset, and select a stored configuration that has both values.
- Tire diameter: Unknown
Enter a proposed tire size in the form 275/65R18 to compare overall diameter.
- Brake clearance: Not verified
Brake and caliper clearance are not stored. The calculator does not verify them.
- Load rating: Not verified
Wheel load rating is not stored. No catalog row is treated as a load approval.
- Body / suspension clearance: Not verified
Fender and suspension clearance are not stored. A stored size range is not a safe-offset band.
Wheel-position diagram
The diagram needs stored and proposed width and offset. It shows geometric wheel position, not vehicle clearance.
What do you need?
Choose a job after the comparison. Calculator edits are not affiliate clicks.
Year variations
- Stored wheel configurations exist for 23 years, 2000–2022.
- Each year keeps its own catalog rows. A later bolt pattern or hub figure is not applied to an earlier year.
Questions
What wheel sizes are stored for the Toyota Tundra?
Toyota Tundra in 2022 stores 9 catalog reference configurations with rim diameters of 18 in and 20 in. These are stored wheel configurations, not a manufacturer-approval list.
What is the Toyota Tundra bolt pattern?
Stored bolt patterns in 2022 are 5×150 and 6×139.7. Select the configuration that matches the vehicle. Do not carry one year's pattern into another year.
What offset range is recorded for the Toyota Tundra?
Stored offset in 2022 is 60 mm. That is stored reference coverage, not proof that every intermediate offset fits.
What is the Toyota Tundra hub bore?
Trim center bore is 95 mm / 110.1 mm (zdonor_wheel_size_trim.center_bore). The fields disagree, so both stay visible and no exact ring is recommended automatically.
Does Toyota Tundra wheel fitment vary by year?
Wheel rows are stored for 23 years, 2000–2022. This page shows 2022. Choose another year to compare that year's stored configurations. A newer pattern is not copied onto an older year.
How does wheel width affect fitment?
Width grows the wheel on both sides of the centerline. Combined with offset it changes inner and outer lip position. That calculation does not establish fender or suspension clearance.
How does changing offset affect wheel position?
Lowering the offset number moves the wheel outward toward the fender. Raising it moves the wheel inward. Example: 8.0 in ET40 to 9.0 in ET30 moves the outer edge 22.7 mm farther toward the fender and the inner edge 2.7 mm closer to the suspension.
Can I use a different bolt pattern?
A different pattern does not mount on 5×150 hardware. An adapter converts one pattern to another in one direction. It does not make the wheel safe or compatible by itself.
What does an adapter change?
An adapter changes the bolt pattern the wheel sees. Thickness also changes effective offset. This page looks up directional catalog adapters only after you choose a target pattern. No thickness is recommended.
How do spacers affect effective offset?
A spacer moves the wheel outward and lowers effective offset by about the spacer thickness. This comparison does not silently add spacer thickness to the geometry. If you want that effect, enter the resulting offset as the proposed value.
How do I compare two tire sizes?
Enter both sizes as section/aspectRrim, for example 275/65R18. The page reports overall diameter difference in millimeters, inches, and percent, plus a diameter-only speedometer estimate. That is not a tire-fitment verdict.
Does a matching tire diameter guarantee fitment?
No. Diameter is only one measurement. Width, load, speed rating, clearance, and the wheel it is mounted on are not proven by a matching number.
Can the calculator verify brake clearance?
No. Brake, caliper, load rating, and body clearance are not stored. Those checks stay marked as not verified.
What additional measurements should I check?
Confirm the installed bolt pattern, hub diameter, thread, seat type, offset, backspacing, load rating, and brake and fender clearance on the vehicle. The catalog cannot supply those missing measurements.
Does a matching bolt pattern guarantee compatibility?
No. Bolt pattern is one check. Center bore, position, tire diameter, brake clearance, load rating, and body clearance are separate.